OmniFix Three-jaw chuck DIN 6350 for rotary table applications Ø200 mm
✔ 3-jaw chuck DIN 6350 for rotary table applications
✔ Corrision Protected
✔ With ergonomic clamping tool and torque wrench
✔ With adapter plate for ZEISS grid plates and pallets
✔ Optimum flexibility through the use of interchangeable jaws
Three-jaw chucks are mainly used for clamping cylindrical or ring-shaped parts at higher clamping forces. Due to the radial clamping of rim-type chucks, damage to the rotary table can occur at higher forces. Due to the central clamping via a kind of knurled nut, which is inserted into the inner square of the chuck, no radial forces occur. This means that the components can be clamped exactly with the required clamping force. With interchangeable jaws you can easily adapt the lathe chuck to your requirements. Special jaws manufactured in-house can also be adapted. The versions with a base plate allow easy mounting on ZEISS rotary tables.
Body made of high-strength steel, corrosion protected, silver
Outer diameter Ø200 mm
Through hole Ø55/Ø40 mm
Height base body 88,5 mm
Clamping tool, steel, galvanized
Outer diameter approx. 36 mm, length approx. 70 mm
Repeat clamping accuracy 0.025 mm
Torque max. 80 Nm
Total clamping force max.31±15% kN
Weight approx. 15.8 kg
Turning jaws 4 – 200 mm
Drill jaws 4 – 186 mm
Largest swing diameter (with max. clamping diameter) 157 mm
Adapter plate made of aluminium, hard coated, black
Outer diameter 270 mm
Fastening possibility with M8 – min/max Ø222 - 252 mm / 120°
Scope of delivery:
1 set = 3 drilling jaws, corrosion-protected, stepped outwards
1 set = 3 rotating jaws, corrosion-protected, stepped inwards
1 turnbuckle 4-kt- SW11 - ½" knurled
1 ratchet ½" switchable
1 set of M8 mounting screws with sliding blocks
To maintain the function and quality of the chuck, it must be serviced at regular intervals.
Chuck must be as free of fast and silicone as possible.
Find out more about ZEISS clamping devices here.