OmniFix Three-jaw ring chucks for rotary table applications Ø200 mm product photo Front View L

OmniFix Three-jaw ring chucks for rotary table applications Ø200 mm

 Shipment within: > 30 days
2.550,00 €Sales tax not included
Quote Inquiry

3-jaw chuck for rotary table applications
Extremly flat design
Optimal accessibility
With adapter plate for ZEISS grid plates and pallets
Optimum flexibility through the use of interchangeable jaws

Three-jaw ring chucks are mainly used for clamping cylindrical or ring-shaped parts at low clamping forces. In contrast to chucks for the machining of workpieces, the clamping force must be significantly lower in metrology, otherwise there is a risk of deformation of the components. By clamping by hand with the clamping ring, the components can be clamped with exactly the required clamping force. With interchangeable jaws, you can easily adapt the ring chuck to your requirements. Special jaws manufactured in-house can also be adapted. The versions with a base plate allow easy mounting on ZEISS rotary tables

Product information:
Body made of high-strength steel, burnished, black
Outer diameter Ø200 mm

Repeat clamping accuracy 0.01 mm
Torque max. 60 Nm
Total clamping force max.4,5±15% kN
Weight approx. 12.6 kg

Clamping range:
Turning jaws 4 – 200 mm
Drill jaws 4 – 180 mm
Largest swing diameter (with max. clamping diameter) 230 mm

Adapter plate made of aluminium, hard coated, black
Outer diameter 276 mm
Fastening possibility with M8 - min/max Ø227 - 257 mm / 120°

Scope of delivery:
1 set = 3 hardened drilling jaws, stepped outwards
1 set = 3 hardened turning jaws, stepped inwards
1 clamping key and, depending on the lathe chuck, corrosponding fastening screws or bolts

Product note:
To maintain the function and quality of the chuck, it must be serviced at regular intervals.
Chuck must be as free of fast and silicone as possible.

Find out more about ZEISS clamping devices here.

product type
3 Jaw Chuck

Recently Viewed