M3 XXT, Star styli straight with clamping adapter, ruby sphere, tungsten carbide shaft
Star stylus M3 XXT, DK1 L17.5
626113-5000-051
Star styli for measuring bores, grooves, undercuts, cylinder and bore diameters instead of disc styli
- Clamping ring with 4 horizontal single styli
- For adaptation to standard extensions
- Spherical styli have the same probing behavior in all directions
- Ruby is the most common spherical material
- Ruby spheres available from 0.2 to 12 mm
- tungsten carbide shaft with high rigidity
- Straight shaft with longer measuring length
- Proven ZEISS quality through high-end production
- product type
- Stylus
- Connection Type
- M3 XXT
- Ø Sphere (DK)
- 1,0 mm
- Length (L)
- 17,5 mm
- Application
- Tactile
- Ø Shaft (DS)
- 2,0 mm
- Ø Body (DG)
- 5,0 mm
- Meas. Len.
- 8,5 mm
- Stylus Type
- Star Stylus
- Ø2 Shaft (DSE)
- 0,6 mm
- 2. Meas. Len.
- 3,7 mm
- Stylus Tip
- Sphere
- Styl. Tip Mat.
- Ruby
- Shaft Mat.
- Tung. Carb.
- Width (B)
- 11,4
Product note
Additional clamping screw is needed.
Depending on the material of the stylus and the workpiece, wear or material deposits may collect on the stylus. Therefore, regularly check your styli under a microscope and clean or replace them if damaged. Depending on the type and degree of contamination, a wide range of cleaning agents are available. ZEISS application engineers recommend stylus cleaning wipes or microfiber cloths.
Recently Viewed
Star stylus M3 XXT, DK1 L17.5
626113-5000-051
451,00 €excl. VAT
Longer delivery time
Stylus straight M3, DK5 L125
626123-0504-125
63,00 €excl. VAT
Available
Stylus stepped M5, DK4 L92
626115-0402-092
118,00 €excl. VAT
Longer delivery time
Stylus stepped M2, DK0.3 L15
626102-5244-015
65,00 €excl. VAT
Available
Disk M5, DK120
626101-2001-005
689,00 €excl. VAT
Longer delivery time
Star stylus M5, DK3.5 L31.75
626115-5000-563
311,00 €excl. VAT
Made to Order
Stylus stepped M3, DK1 L26
626123-0044-026
45,00 €excl. VAT
Available
Rotating Knuckle joint, M5, 11 mm
626105-6280-040
139,00 €excl. VAT
Available